Master Spa - HELKW40 - 4.0 kW Heater Element

4.0 kW 10'' Flow Through Heater Element Dimensions: Length: 10 in. (25.40 cm) Weight: 9.6 oz. (270 g) This parts comes with the following pieces: Heater Unit: 1 (one) Hex Nuts: 2 (two) O-Rings: 2 (two) Lock-Nuts: 2 (two)    

Master Spa - HELKW55 - 5.5 kW Heater Element

5.5 kW 10'' Flow Through Heater Element Dimensions: Length: 10 in. (25.40 cm) Weight: 9.6 oz. (270 g) This parts comes with the following pieces: Heater Unit: 1 (one) Hex Nuts: 2 (two) O-Rings: 2 (two) Lock-Nuts: 2 (two)

Master Spa - X300007 - Copper Heater Strap

Copper heater strap for Master Spas heaters. Part # X300007 V/N: 30015 Description:Short Heater Strap has a curved middle and a right angle as shown in the photograph Used for connection of a Heater Unit to the Board within the Spa pack Dimensions:...

Master Spa - X300016 - Copper Heater Strap

X300016 - Copper Heater Strap V/N: 30511 Description: Short Heater Strap has a curved middle and a right angle as shown in the photographUsed for connection of a Heater Unit to the Board within the Spa packDimensions: Length: 2.375 inches (6.0325)...

Master Spa - X300390 - Long Heater Strap for VS 501 or 510 Spa Packs

X300390 - Long Heater Strap w/ out Nut for VS 501 or 510 Spa Packs X300390 Copper Heater Strap for VS Packs V/N: 30039 Description:Long Heater Strap has a curved middle and a right angle as shown in the photograph Used for connection of a Heater Unit to...

Master Spa - X300713 - 5.5 kW M7 Heater Assembly for 501 & 510 Plastic Spa Packs

X300713 - 5.5 kW M7 Heater Assembly for 501 & 510 Plastic Spa Packs  X300713 5.5kW M7 Heater for Plastic Packs V/N: 58083  Comes with: (2) X801830 - 12 inch by .25 inch A&B M7 Temp/High Limit Sensor (2) X277700 - Master Spas 2 inch...

Master Spa - X300910 - 5.5kW Incalloy Heater Assembly w/ Pressure Switch

5.5kW M7 heater assembly with 2" heater unions and pressure switch. Made for Master Spas. Part # X300910 X3009105.5kW, 825 Incoloy Heater w/Pressure SwitchV/N: 58013

Master Spa - X300920 - 5.5kW 825 Incalloy Heater Assembly w/ Pressure Switch

5.5kW 825 incalloy heater assembly with 1.5" heater unions and pressure switch. Made for Master Spas. Part # X300920 X3009205.5kW, 825 Incoloy Heater w/Pressure SwitchV/N: 58015

Master Spa - X300935 - 5.5kW M7 Heater Assembly with w/ 24 inch Sensors

X300935 - 5.5kW M7 Heater Assembly with w/ 24 inch Sensors X300935 5.5kW, M7, 825 Incoloy Heater w/ 24” Sensors V/N: 58010 Comes with: (2) X801835 - 24 inch by .25 inch A&B M7 Temp/High Limit Sensor(2) X277700 - Master Spas 2 inch Heater...

Master Spa - X300937 - 4.0kW Heater Assembly for H2X Momentum

Master Spa - X300937 - 4.0kW Heater Assembly for H2X Momentum X300937 4.0kW, M7 Heater for Revolution Pack/Momentum V/N: 55950  Dimensions (Approximate): Length: 15.0 inches (38.10 cm) Width: 5.0 inches (12.7 cm) Height: 5.0 inches (12.7 cm)...

Master Spa - X300939 - 5.5kW Auxiliary Slave Heater System

X300939 5.5 KW AUXILIARY SLAVE HEATER PACK X3009395.5kW Auxiliary, Slave Heater SystemV/N: 58132(requires dedicated, 30A GFCI)

Master Spa - X300940 - 4.0kW 800 Incoloy Heater with Cord for MS40U System

X300940 - 4.0kW 800 Incoloy Heater with Cord for MS40U System  These heaters are being shipped shipped as V/N: 58104 4kW, 800 Incoloy Heater for MS40U V/N: 58303 These are basically the same heater as X801761 - 4.0kW Heater Assembly (58104) with...